• The complete IFX Cold Air Intake kit for the Hyundai i30 Sedan N, featuring a mandrel-bent 3-inch pipe, 6-inch K&N filter, and CNC bell-mouth airbox.
  • The complete IFX Cold Air Intake kit for the Hyundai i30 Sedan N, featuring a mandrel-bent 3-inch pipe, 6-inch K&N filter, and CNC bell-mouth airbox.
  • Low-angle view of the IFX intake kit for the Sedan N, highlighting the massive air volume capacity of the 6-inch velocity stack system.
  • Detailed front angle of the Sedan N intake assembly, showing the Ebony Texture powder-coated finish and stainless steel Breeze clamps.
  • Close-up of the IFX 3mm aluminum airbox with integrated 6-inch bell mouth and laser-cut stainless steel branding for the i30 Sedan N.
  • Rear view of the Sedan N airbox, detailing the CNC-folded mounting brackets that utilize factory points for a 100% bolt-in installation.
  • Technical shot of the 3-inch aluminum intake pipe, featuring a seamless mandrel bend and textured black powder coat for an OEM+ look.
  • Rear detail of the IFX intake pipe, showing the high-quality welds and factory-spec breather ports for the Hyundai i30 Sedan N.
  • Genuine K&N 6-inch cotton gauze air filter used in the IFX intake kit, providing superior filtration and a million-mile warranty.
  • The IFX intake kit installed in an i30 Sedan N engine bay, showing the perfect clearance around the battery and factory ducting integration.
  • Overhead view of the i30 Sedan N engine bay with the IFX intake fitted, illustrating the top-seal airbox design that prevents heat soak.
The complete IFX Cold Air Intake kit for the Hyundai i30 Sedan N, featuring a mandrel-bent 3-inch pipe, 6-inch K&N filter, and CNC bell-mouth airbox.
The complete IFX Cold Air Intake kit for the Hyundai i30 Sedan N, featuring a mandrel-bent 3-inch pipe, 6-inch K&N filter, and CNC bell-mouth airbox.
Low-angle view of the IFX intake kit for the Sedan N, highlighting the massive air volume capacity of the 6-inch velocity stack system.
Detailed front angle of the Sedan N intake assembly, showing the Ebony Texture powder-coated finish and stainless steel Breeze clamps.
Close-up of the IFX 3mm aluminum airbox with integrated 6-inch bell mouth and laser-cut stainless steel branding for the i30 Sedan N.
Rear view of the Sedan N airbox, detailing the CNC-folded mounting brackets that utilize factory points for a 100% bolt-in installation.
Technical shot of the 3-inch aluminum intake pipe, featuring a seamless mandrel bend and textured black powder coat for an OEM+ look.
Rear detail of the IFX intake pipe, showing the high-quality welds and factory-spec breather ports for the Hyundai i30 Sedan N.
Genuine K&N 6-inch cotton gauze air filter used in the IFX intake kit, providing superior filtration and a million-mile warranty.
The IFX intake kit installed in an i30 Sedan N engine bay, showing the perfect clearance around the battery and factory ducting integration.
Overhead view of the i30 Sedan N engine bay with the IFX intake fitted, illustrating the top-seal airbox design that prevents heat soak.

The Ultimate Intake for the Ultimate Sedan.

Please note: Our kits are hand-crafted to order and fulfilled in the sequence they are received.

Did you know we have a reputation for making the best-sounding intakes in the Hyundai N scene? It’s a reputation we’ve earned through hundreds of builds, and the i30 Sedan N (CN7N) kit is our latest masterpiece. We didn’t just "make it fit"—we engineered it to suit the unique engine bay and aggressive character of the Sedan N.

The Spec Sheet 


6-inch K&N Filter: Reusable, washable, and legendary. ♻️

6-inch CNC Bell Mouth: The secret to that massive induction roar. 🎶

3mm Aluminum Airbox: Heavy-duty, heat-shielding construction. 🛡️

Integrated Factory Ducting: Keeps the "Cold" in Cold Air Intake. ❄️

3-inch Mandrel-Bent Pipe: Finished in Ebony Texture Black powder coat. 💃

4-Ply Silicone Joiners: Because nobody wants single-ply in their engine bay. 🧻

Breeze Stainless Clamps: The gold standard in hose security. 🏆

100% Australian Made: Fabricated right here in our workshop. 🇦🇺

Why the IFX Kit for your Sedan N?


That Signature "N" Induction Sound


Let's be real: you bought the Sedan N for the theater. The pops, the crackles, and now—the spool. Our 6-inch bell mouth design transforms the turbo’s intake note into a crisp, high-fidelity soundtrack that the factory plastic box just can't touch. It’s the easiest way to put a smile on your face every time you hit the throttle.

Engineering for the CN7N Chassis


The Sedan N engine bay is tight. Our 5-sided airbox design uses a Top-Seal method, where the rubber pinch weld meets the bonnet to create a true cold-air partition. We’ve utilized the factory mounting points and intake ductwork, meaning you get a high-performance setup with a "bolt-in" factory fit. No drilling, no drama.

The Science of the 6-Inch Bell Mouth


Most intakes just shove a pipe into a filter. We use a massive velocity stack (bell mouth) to transition air from 6 inches down to 3 inches. This significantly reduces turbulence and speeds up airflow into the turbo, providing better response and a more consistent power band.

Filtration Without Compromise


While paper filters block up and choke your turbo, our K&N Cotton Filter uses oil-suspended filtration. It flows more air, more often. With a 1.6 million kilometer warranty, this is the last filter you will ever buy for your car. In the time it takes to "life" one K&N, you would have gone through over 50 factory paper filters.

Appearance: The OEM+ Aesthetic


We know Sedan N owners take pride in a clean bay. The IFX pipe and airbox are finished in our in-house OxyTech Ebony Texture Black. It looks like it belongs there—stealthy, professional, and rugged. Combined with our laser-cut, polished stainless steel IFX badge, it’s the centerpiece your engine bay deserves.

What’s in the Box?

IFX CN7N Spec Powder-coated Airbox (6" Bell Mouth + Blister Seal)

3" Aluminum Intake Pipe (with correctly sized hose tails for a plug-and-play fit)

6" K&N Performance Air Filter

4-Ply Black Silicone Joiners & Breeze Clamps

All hardware required for installation

Suits:

Hyundai i30 Sedan N (2021+)

Hyundai Elantra N (RHD MODELS ONLY)

Hyundai Avante N (RHD MODELS ONLY

Need it installed? Visit us at our Sydney workshop for professional fitment.

IFX

Hyundai i30 Sedan N IFX Cold Air Intake 6 Inch Bell Mouth, K&N Filter

$860,00

The Ultimate Intake for the Ultimate Sedan.

Please note: Our kits are hand-crafted to order and fulfilled in the sequence they are received.

Did you know we have a reputation for making the best-sounding intakes in the Hyundai N scene? It’s a reputation we’ve earned through hundreds of builds, and the i30 Sedan N (CN7N) kit is our latest masterpiece. We didn’t just "make it fit"—we engineered it to suit the unique engine bay and aggressive character of the Sedan N.

The Spec Sheet 


6-inch K&N Filter: Reusable, washable, and legendary. ♻️

6-inch CNC Bell Mouth: The secret to that massive induction roar. 🎶

3mm Aluminum Airbox: Heavy-duty, heat-shielding construction. 🛡️

Integrated Factory Ducting: Keeps the "Cold" in Cold Air Intake. ❄️

3-inch Mandrel-Bent Pipe: Finished in Ebony Texture Black powder coat. 💃

4-Ply Silicone Joiners: Because nobody wants single-ply in their engine bay. 🧻

Breeze Stainless Clamps: The gold standard in hose security. 🏆

100% Australian Made: Fabricated right here in our workshop. 🇦🇺

Why the IFX Kit for your Sedan N?


That Signature "N" Induction Sound


Let's be real: you bought the Sedan N for the theater. The pops, the crackles, and now—the spool. Our 6-inch bell mouth design transforms the turbo’s intake note into a crisp, high-fidelity soundtrack that the factory plastic box just can't touch. It’s the easiest way to put a smile on your face every time you hit the throttle.

Engineering for the CN7N Chassis


The Sedan N engine bay is tight. Our 5-sided airbox design uses a Top-Seal method, where the rubber pinch weld meets the bonnet to create a true cold-air partition. We’ve utilized the factory mounting points and intake ductwork, meaning you get a high-performance setup with a "bolt-in" factory fit. No drilling, no drama.

The Science of the 6-Inch Bell Mouth


Most intakes just shove a pipe into a filter. We use a massive velocity stack (bell mouth) to transition air from 6 inches down to 3 inches. This significantly reduces turbulence and speeds up airflow into the turbo, providing better response and a more consistent power band.

Filtration Without Compromise


While paper filters block up and choke your turbo, our K&N Cotton Filter uses oil-suspended filtration. It flows more air, more often. With a 1.6 million kilometer warranty, this is the last filter you will ever buy for your car. In the time it takes to "life" one K&N, you would have gone through over 50 factory paper filters.

Appearance: The OEM+ Aesthetic


We know Sedan N owners take pride in a clean bay. The IFX pipe and airbox are finished in our in-house OxyTech Ebony Texture Black. It looks like it belongs there—stealthy, professional, and rugged. Combined with our laser-cut, polished stainless steel IFX badge, it’s the centerpiece your engine bay deserves.

What’s in the Box?

IFX CN7N Spec Powder-coated Airbox (6" Bell Mouth + Blister Seal)

3" Aluminum Intake Pipe (with correctly sized hose tails for a plug-and-play fit)

6" K&N Performance Air Filter

4-Ply Black Silicone Joiners & Breeze Clamps

All hardware required for installation

Suits:

Hyundai i30 Sedan N (2021+)

Hyundai Elantra N (RHD MODELS ONLY)

Hyundai Avante N (RHD MODELS ONLY

Need it installed? Visit us at our Sydney workshop for professional fitment.
$860,00
The complete IFX Cold Air Intake kit for the Hyundai i30 Sedan N, featuring a mandrel-bent 3-inch pipe, 6-inch K&N filter, and CNC bell-mouth airbox. The complete IFX Cold Air Intake kit for the Hyundai i30 Sedan N, featuring a mandrel-bent 3-inch pipe, 6-inch K&N filter, and CNC bell-mouth airbox. Low-angle view of the IFX intake kit for the Sedan N, highlighting the massive air volume capacity of the 6-inch velocity stack system. Detailed front angle of the Sedan N intake assembly, showing the Ebony Texture powder-coated finish and stainless steel Breeze clamps. Close-up of the IFX 3mm aluminum airbox with integrated 6-inch bell mouth and laser-cut stainless steel branding for the i30 Sedan N. Rear view of the Sedan N airbox, detailing the CNC-folded mounting brackets that utilize factory points for a 100% bolt-in installation. Technical shot of the 3-inch aluminum intake pipe, featuring a seamless mandrel bend and textured black powder coat for an OEM+ look. Rear detail of the IFX intake pipe, showing the high-quality welds and factory-spec breather ports for the Hyundai i30 Sedan N. Genuine K&N 6-inch cotton gauze air filter used in the IFX intake kit, providing superior filtration and a million-mile warranty. The IFX intake kit installed in an i30 Sedan N engine bay, showing the perfect clearance around the battery and factory ducting integration. Overhead view of the i30 Sedan N engine bay with the IFX intake fitted, illustrating the top-seal airbox design that prevents heat soak.
The complete IFX Cold Air Intake kit for the Hyundai i30 Sedan N, featuring a mandrel-bent 3-inch pipe, 6-inch K&N filter, and CNC bell-mouth airbox. The complete IFX Cold Air Intake kit for the Hyundai i30 Sedan N, featuring a mandrel-bent 3-inch pipe, 6-inch K&N filter, and CNC bell-mouth airbox. Low-angle view of the IFX intake kit for the Sedan N, highlighting the massive air volume capacity of the 6-inch velocity stack system. Detailed front angle of the Sedan N intake assembly, showing the Ebony Texture powder-coated finish and stainless steel Breeze clamps. Close-up of the IFX 3mm aluminum airbox with integrated 6-inch bell mouth and laser-cut stainless steel branding for the i30 Sedan N. Rear view of the Sedan N airbox, detailing the CNC-folded mounting brackets that utilize factory points for a 100% bolt-in installation. Technical shot of the 3-inch aluminum intake pipe, featuring a seamless mandrel bend and textured black powder coat for an OEM+ look. Rear detail of the IFX intake pipe, showing the high-quality welds and factory-spec breather ports for the Hyundai i30 Sedan N. Genuine K&N 6-inch cotton gauze air filter used in the IFX intake kit, providing superior filtration and a million-mile warranty. The IFX intake kit installed in an i30 Sedan N engine bay, showing the perfect clearance around the battery and factory ducting integration. Overhead view of the i30 Sedan N engine bay with the IFX intake fitted, illustrating the top-seal airbox design that prevents heat soak.

Frequently Bought Together

Total price$1.555,29

Product Description

The Ultimate Intake for the Ultimate Sedan.

Please note: Our kits are hand-crafted to order and fulfilled in the sequence they are received.

Did you know we have a reputation for making the best-sounding intakes in the Hyundai N scene? It’s a reputation we’ve earned through hundreds of builds, and the i30 Sedan N (CN7N) kit is our latest masterpiece. We didn’t just "make it fit"—we engineered it to suit the unique engine bay and aggressive character of the Sedan N.

The Spec Sheet 


6-inch K&N Filter: Reusable, washable, and legendary. ♻️

6-inch CNC Bell Mouth: The secret to that massive induction roar. 🎶

3mm Aluminum Airbox: Heavy-duty, heat-shielding construction. 🛡️

Integrated Factory Ducting: Keeps the "Cold" in Cold Air Intake. ❄️

3-inch Mandrel-Bent Pipe: Finished in Ebony Texture Black powder coat. 💃

4-Ply Silicone Joiners: Because nobody wants single-ply in their engine bay. 🧻

Breeze Stainless Clamps: The gold standard in hose security. 🏆

100% Australian Made: Fabricated right here in our workshop. 🇦🇺

Why the IFX Kit for your Sedan N?


That Signature "N" Induction Sound


Let's be real: you bought the Sedan N for the theater. The pops, the crackles, and now—the spool. Our 6-inch bell mouth design transforms the turbo’s intake note into a crisp, high-fidelity soundtrack that the factory plastic box just can't touch. It’s the easiest way to put a smile on your face every time you hit the throttle.

Engineering for the CN7N Chassis


The Sedan N engine bay is tight. Our 5-sided airbox design uses a Top-Seal method, where the rubber pinch weld meets the bonnet to create a true cold-air partition. We’ve utilized the factory mounting points and intake ductwork, meaning you get a high-performance setup with a "bolt-in" factory fit. No drilling, no drama.

The Science of the 6-Inch Bell Mouth


Most intakes just shove a pipe into a filter. We use a massive velocity stack (bell mouth) to transition air from 6 inches down to 3 inches. This significantly reduces turbulence and speeds up airflow into the turbo, providing better response and a more consistent power band.

Filtration Without Compromise


While paper filters block up and choke your turbo, our K&N Cotton Filter uses oil-suspended filtration. It flows more air, more often. With a 1.6 million kilometer warranty, this is the last filter you will ever buy for your car. In the time it takes to "life" one K&N, you would have gone through over 50 factory paper filters.

Appearance: The OEM+ Aesthetic


We know Sedan N owners take pride in a clean bay. The IFX pipe and airbox are finished in our in-house OxyTech Ebony Texture Black. It looks like it belongs there—stealthy, professional, and rugged. Combined with our laser-cut, polished stainless steel IFX badge, it’s the centerpiece your engine bay deserves.

What’s in the Box?

IFX CN7N Spec Powder-coated Airbox (6" Bell Mouth + Blister Seal)

3" Aluminum Intake Pipe (with correctly sized hose tails for a plug-and-play fit)

6" K&N Performance Air Filter

4-Ply Black Silicone Joiners & Breeze Clamps

All hardware required for installation

Suits:

Hyundai i30 Sedan N (2021+)

Hyundai Elantra N (RHD MODELS ONLY)

Hyundai Avante N (RHD MODELS ONLY

Need it installed? Visit us at our Sydney workshop for professional fitment.

Similar Products

Customers also bought

    Complementary products